Part Number:  G9510-47090
Container Number: BL-F03
Outer Dimension:  1070×900×475
 
<Unpacking Procedure>   1. To remove the lid, undo the 14 bolts. 2. Remove the lid by sliding.   3. Undo the bolts on all the walls. 
* Note: Work by two persons to ensure that the walls will not fall.		 4. Remove the front and back walls.        
  * 14 assembly bolts are tightened on the side walls and the lid. * Pull the wall and shift the joint part upward as shown in the photo.　　　　　
For safe work, wear protective equipment
and follow the procedure.  
 
             
 
     
 
             
           
 
             
             
  Names of each surface            
 
           
             
             
             
             
             
                                               
5. Remove the side walls.     6. Remove the top cushioning material (styrene foam).  * Handle the cushioning material with care not to damage it. 7. Peel off the tape and open the plastic sheet. 12. Confirm the hanging position.   13. Take out the battery.  
* Pull the wall and shift the joint part upward as shown in the photo.　　　　　 * Confirm the position to install the hanging tool.    
       
        Take out in accordance with the service manual.
 
 
 
 
        (Use the specified hanging tool.)
       
           
           
           
           
           
           
           
                                               
14. Remove the plastic sheet.